 |
HP系列超宽输入 12.5--154VDC铁路专用卡盒式电源
- Bel Power Solution
- ： 暂无价格
-
累计销量0 累计评价0 - ：HP系列
- ：全国
- ：片
-
- 13522494281
|
These extremely compact DC-DC converters incorporate all necessary input and output filters, signaling and protection features, which are required in the majority of applications. The converters provide important advantages, such as flexible output power through total current limitation, extremely high efficiency, excellent reliability, very low ripple and RFI noise levels, full input-to-output isolation, negligible inrush current, soft start, over temperature protection, interruption time, and input over- and undervoltage lockout.
The converters are particularly suitable for rugged environments, such as railway applications. They have been designed in accordance with the European railway standards EN 50155 and EN 50121-3-2. All printed circuit boards are coated with a protective lacquer. The converter covers a total input voltage range from 12.5 to 154 VDC in the same model. The input is protected against surges and transients occurring on the source lines. The outputs are continuously open- and shortcircuit proof.
Full system flexibility and n+1 redundant operating mode are possible due to series or parallel connection capabilities of the outputs under the specified conditions. When several converters with T option are connected in parallel, a single-wire connection between these converters ensures good current sharing. LEDs at the front panel and an isolated output OK signal indicate the status of the converter. Voltage suppressor diodes and an independent overvoltage monitor protect the outputs against an internally generated overvoltage.
The converters are designed using transformers with planar technology. The input voltage is fed to a booster, which generates approximately 70 V. If Vi is higher, the booster becomes simply a diode. The resulting intermediate voltage supplies the powertrains.
There are two powertrains fitted to a converter, each consisting either of a regulated single output with synchronous rectifier or of a regulated main output with a tracking second output. The output power may be flexibly distributed among the main and the tracking output of each powertrain. Close magnetic coupling in the transformers and output inductors together with circuit symmetry ensure a small deviation between main and tracking output.
A storage capacitor charged to approx. 70 V enables the powertrains to operate during the specified interruption time.
As part of a distributed power supply system, the low-profile design significantly reduces the required volume without sacrificing high reliability. The converters are particularly suitable for 19" rack systems occupying 3 U /4 TE only, but they can also be chassis-mounted by screws or fitted with a heat sink. The connector type is H15. The fully enclosed black-coated aluminum case acts as heat sink and RFI shield, such protecting the converter together with the coating of all components against environmental impacts.
作为分布式的电源系统的一部分，低姿态的设计大大减少了所需的卷不牺牲可靠性高。转换器是一种特别适合 19"机架系统占领 3 U 4 TE 只，但他们也可以通过螺钉安装机箱或装有散热片。连接器类型是 H15。全封闭的黑色涂层铝案例作为散热片和 RFI 屏蔽，这种保护和涂布量对环境影响的所有组件的转换器。
bcd.00495_ac_front_panels_and_din-racks.pdf
